Kyle / TX

Lead-Painted Window and Door Removal in Kyle, TX

Kyle Lead Paint Removal handles lead-painted windows and doors in Kyle, TX, in houses built before 1978. These parts need their own plan because they are friction and impact surfaces: a sash grinds against its stops each time it opens, a door rubs its jamb, and that motion turns old paint into fine dust that settles on sills and floors. Exterior sills and casings also take the full Texas sun.

The main choice is replace or restore, and in a pre-1978 house replacement is always covered by the EPA renovation rule. We plan window and door work in Kyle and surrounding communities, including San Marcos and Lockhart.

Ask about your windows or doors
Old wood window sash and sill with many layers of chipped, peeling white paint

Window and door options

Replacing original windows

New windows end the friction problem for good, since the painted sashes leave the house. The removal is where the dust is made, so it is handled as covered renovation: interior containment, covered ground outside, careful prying instead of breaking, and cleaning verification once the new units are in. Interior and exterior trim disturbed along the way is part of the same job.

Stripping and restoring sashes

Owners of early Kyle houses may prefer to keep original wood sashes and old glass. Restoration means taking the sashes out, stripping paint in a contained area or off site, repairing the wood, reglazing and repainting with lead-free paint, sometimes adding weatherstripping so the sash no longer grinds at the jambs. When the goal is to remove the lead paint permanently, the work is abatement and needs a DSHS-certified firm.

Sills and exterior casings

Sills catch rain, sun and the dust from the sash above. On an older house the exterior sill and casing can be the first places to show alligatored, chalking or peeling paint, and chips drop into the soil below. Options run from abating the sill and casing, to replacing rotted pieces, to capping a sound sill with a fitted cover, which is a form of enclosure.

Doors and jambs

Doors wear lead paint along the hinge edge, the latch edge and where they meet the stop. Planing a sticking door that carries old paint throws off fine dust, so it should be done as lead-safe work. Choices include stripping and rehanging the original door, replacing the slab while keeping the frame, or replacing frame and casing too when they also test positive.

Newer windows in an older house

A pre-1978 Kyle house may already have vinyl or aluminum replacement windows, and an owner may assume that settles it. The EPA says otherwise: even for windows installed within the last 20 years, the RRP rule applies unless all components affected by the work, including the windows, are found free of lead-based paint by a certified inspector or risk assessor, or by a certified renovator using an EPA-recognized test kit or paint-chip sampling. The surrounding stools, stops and casings may still be original painted wood. Keep any lead-free determination records.

Window and door work inside a bigger remodel follows lead-safe renovation practices. When the whole exterior needs attention, see lead paint removal for older homes. Kyle Lead Paint Removal has the overview.

Your next step

Discuss window and door work

Count the windows and doors you have in mind and note whether new units or restored originals appeal more. Add the year the house went up, its address, and anything a test has shown about the trim. We'll get back to you soon with an estimate or any questions we have. Estimates are free and there's no obligation.

Call (737) 248-7125

Call (737) 248-7125